HP ENVY 12-g000 Maintenance and Service Guide - Page 66
Right USB board
![]() |
View all HP ENVY 12-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Right USB board Description Spare part number Right USB board (includes rubber, Mylar screw/POGO cover, bottom thermal Mylar, side thermal Mylar, and thermal grease) L14763-001 Right USB board cable (includes Mylar screw/POGO cover, bottom thermal Mylar, side thermal Mylar, and L14765-001 thermal grease) Right USB board bracket (includes Mylar screw/POGO cover) L14781-001 Before removing the right USB board, follow these steps: 1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the tablet. 3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the tablet. 4. Remove the display panel assembly (see Display assembly on page 32). 5. Remove the Mylar shield (see Mylar shield (WWAN models only) on page 37). 6. Disconnect the battery (see Battery on page 40). 7. Remove the audio board (see Battery on page 40). Remove the right USB board: 1. Disconnect the cable from the board (1). 2. Remove the Phillips M2.0×2.0 screw (2) that secures the board to the tablet. 58 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
![](/manual_guide/products/hewlettpackard-envy-12g000-maintenance-service-guide-d4c3937/66.png)