HP ENVY 15-bp100 Maintenance and Service Guide - Page 39
Remove the bottom cover, Reverse this procedure to install the bottom cover.
View all HP ENVY 15-bp100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2. Remove the following screws that secure the bottom cover to the computer: (2) Four Torx5 M2.5×6.7 screws under the rear rubber foot strip (3) Three Phillips PM2.0×5.2 screws on the front edge 3. Insert a case utility tool (1) or similar thin, plastic tool between the front edge of the bottom cover and the keyboard/top cover. 4. Remove the bottom cover (2). Reverse this procedure to install the bottom cover. Component replacement procedures 31
2.
Remove the following screws that secure the bottom cover to the computer:
(2)
Four Torx5 M2.5×6.7 screws under the rear rubber foot strip
(3)
Three Phillips PM2.0×5.2 screws on the front edge
3.
Insert a case utility tool
(1)
or similar thin, plastic tool between the front edge of the bottom cover and
the keyboard/top cover.
4.
Remove the bottom cover
(2)
.
Reverse this procedure to install the bottom cover.
Component replacement procedures
31