HP ENVY 15-bp100 Maintenance and Service Guide - Page 59
Speakers, Remove the display panel cable from the retention clips
View all HP ENVY 15-bp100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
2. Remove the SD card board (2). Reverse this procedure to install the SD card board. Speakers Description Speakers (includes cables and four rubber isolators) Spare part number 924343-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). 5. Remove the battery (see Battery on page 32). 6. Remove the system board (see System board on page 41). Remove the speakers: 1. Release the speaker cable from the retention clips (1) and routing channel built into the keyboard/ top cover. 2. Remove the display panel cable from the retention clips (2) and routing channel built into the left speaker. 3. Remove the four Phillips PM2.0×6.3 broad head shoulder screws (3) that secure the speakers to the keyboard/top cover. Component replacement procedures 51