HP ENVY 15-bp100 Maintenance and Service Guide - Page 69
Power connector cable, and then remove the following components
View all HP ENVY 15-bp100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
f. Remove the wireless antenna cables and transceivers (4). The wireless antenna cables and transceivers are available using spare part number 924307-001. Reverse this procedure to reassemble and install the display assembly. Power connector cable Description Power connector cable Spare part number 933523-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30), and then remove the following components: a. Battery (see Battery on page 32) b. System board (see System board on page 41) c. Speakers (see Speakers on page 51) d. Display assembly (see Display assembly on page 53) Remove the power connector cable: ▲ Remove the power connector cable. Component replacement procedures 61