HP ENVY 15-bp100 Maintenance and Service Guide - Page 42
Solid-state drive, Disconnect all external devices connected to the computer.
View all HP ENVY 15-bp100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3. If it is necessary to disassemble the hard drive, remove the hard drive rubber sleeve (1) from the hard drive, and then disconnect the hard drive cable (2) from the hard drive. Reverse this procedure to reassemble and install the hard drive. Solid-state drive Description For use only on computer models with model numbers 15m-bp1xx through 15-bp1xx: 512-GB, 2280, PCIe, NVMe solid-state drive 256-GB, 2280, PCIe, NVMe solid-state drive For use on all computer models: 512-GB, 2280 M.2, PCIe3×4, SS, NVMe solid-state drive with TLC 360-GB, 2280 M.2, PCIe3×4, SS, NVMe solid-state drive with TLC 256-GB, 2280 M.2, PCIe3×4, SS, NVMe solid-state drive with TLC 256-GB, 2280 M.2, SATA-3, with solid-state drive TLC 128-GB, 2280 M.2, SATA-3 solid-state drive Spare part number L01301-002 L01300-002 847110-015 917818-002 847109-018 759848-028 827560-038 Before removing the solid-state drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 34 Chapter 5 Removal and replacement procedures