HP EVA P6550 HP P6000 EVA Updating Product Software Guide (XCS 11200000) (5697 - Page 34
HP P6000 Command View. Thus, when you upgrade HP P6000 Command View on
View all HP EVA P6550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
NOTE: Management module software is bundled with the array-based management version of HP P6000 Command View. Thus, when you upgrade HP P6000 Command View on the management module, you are also upgrading the management module software. Even if you are not using array-based management, you must complete the procedure in this section for the EVA4400, P63x0 EVA, or P65x0 EVA, to ensure that the array has the current management module software. To upgrade the management module: 1. Connect a server with a DVD drive to the management module port (1, Figure 8 (page 34)) on the controller enclosure. Figure 8 Management module 2. Insert the installation DVD into the drive. 3. Open a browser and navigate to the P6000 Control Panel: https://HP array IP address:2373 NOTE: • If you have not previously set the IP address for the management module, the default is 192.168.0.1. • If you have not previously completed the initial setup for the management module, see "Connecting to the management module (initial setup)" in the HP P6000 Control Panel User Guide. The P6000 Control Panel login window appears. 4. Log in as an HP EVA administrator (user name admin and the password). The P6000 Control Panel GUI appears. 5. In the navigation pane, select Update management module firmware. The Update Management Module Firmware window opens. 6. Click Browse and browse to the installation DVD. 7. Select the ABM.pkg file and click Next step. 8. Follow the online instructions and click Finish. A confirmation window opens. 9. Click OK. The Management Module Restart in Progress window opens. The image files are loaded. This step can take several minutes. IMPORTANT: The management module will restart upon completion of the update. Allow up to 15 minutes to re-establish a browser connection. Do not reseat, restart, or reset the management module during this time if you are unable to reconnect from your browser. After the management module restarts, it may exhibit slow response time for about 5 to 10 minutes while gathering array information and completing background processes. 34 Preparing for the upgrade