HP EVA P6550 HP P6000 EVA Updating Product Software Guide (XCS 11200000) (5697 - Page 53
I/O tab of Disk Enclosure Properties window
![]() |
View all HP EVA P6550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
d. Verify that the Operational state (for I/O modules A and B) is Good (Figure 26 (page 53)) for every I/O module and observe the Firmware revision (for I/O modules A and B) to ensure that the upgrade was successful. • For EVA4400/6400/8400, verify that the firmware version is 0112. • For P63x0/65x0 EVA, verify that the firmware version is 0148. Figure 26 I/O tab of Disk Enclosure Properties window NOTE: The Firmware revision fields are different for EVAx400 and P6000 disk enclosures. If the fields Assembly serial number, Hardware revision, and Hardware type on the I/O tab of the Disk Enclosure Properties window are blank, you can optionally reset the I/O modules to clear the blank fields after the I/O module firmware upgrade has completed successfully. Note that blank fields do not affect the array's ability to process host I/O. See "Resetting the I/O module" (page 54) for more information. Step 5. Upgrading the controller software 53
![](/manual_guide/products/hewlettpackard-eva-p6550-hp-p6000-eva-updating-product-software-guide-xcs-11200000-56972483-2013-a1671b8/53.png)