HP EliteBook Folio 1000 HP EliteBook Folio 1040 G1 Notebook PC Maintenance and - Page 66
Power connector, Disconnect the power connector cable from the system board
View all HP EliteBook Folio 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Power connector Description Power connector Spare part number 749612-001 Before removing the power connector, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Bottom cover (see Bottom cover on page 35) 5. Remove the battery (see Battery on page 41), and then remove the following components: Remove the power connector: 1. Disconnect the power connector cable from the system board (1). 2. Remove the Phillips PM2.0×3.0 screw (2) that secures the power connector cable to the computer. 3. Lift the power connector from the computer (3). Reverse this procedure to install the power connector. 58 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts