HP EliteBook Folio 1000 HP EliteBook Folio 1040 G1 Notebook PC Maintenance and - Page 72
Multi-function board, Remove the function board
View all HP EliteBook Folio 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Multi-function board Description Function board Spare part number 739574-001 Before removing the function board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 35) 5. Remove the battery (see Battery on page 41). 6. Remove the keyboard (see Keyboard on page 50) 7. Remove the heat sink/fan assembly (see Heat sink/fan assembly on page 59) 8. Remove the system board (see System board on page 61) Remove the function board: 1. Remove the Phillips PM2.0×3.0 screw (1) that secures the board to the computer. 2. Lift the board up and off the computer (2). NOTE: The function board cable is available in the Cable Kit, spare part number 739564-001. Reverse the removal procedures to install the function board. 64 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts