HP Indigo WS6600 Splice Detection System Installation and Troubleshooting -- C - Page 13

While holding the jig and with the small sensor touching the jig, tighten the small sensor's outer nut

Get HP Indigo WS6600 PDF manuals and user guides View all HP Indigo WS6600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

10. Install another nut onto the small sensor in the inside of the bracket. This nut does not need to be flush with the sensor head but should be slightly beyond the sensor head. Do not tighten either of the small sensor's nuts. 11. Slide the sensor distance jig between the two sensors. 12. While holding the jig and with the small sensor touching the jig, tighten the small sensor's outer nut to fix the distance between the sensors at 40 mm. Installing the sensor 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
10.
Install another nut onto the small sensor in the inside of the bracket. This nut does not need to be
flush with the sensor head but should be slightly beyond the sensor head. Do not tighten either of
the small sensor’s nuts.
11.
Slide the sensor distance jig between the two sensors.
12.
While holding the jig and with the small sensor touching the jig, tighten the small sensor’s outer nut
to fix the distance between the sensors at 40 mm.
Installing the sensor
11