HP Indigo WS6600 Splice Detection System Installation and Troubleshooting -- C - Page 18
Installing the wiring
View all HP Indigo WS6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
22. Connect the two sensor cables to each other. Be careful with the connector pins. 23. Connect the sensor cable's molex connector to the front holder bracket. 1 Sensor cable's molex connector 2 Front holder bracket 24. Reinstall the water hoses cover with the original two M4 Allen screws. See Preliminary steps on page 4. 25. Close the press software and shut down the press. Installing the wiring Follow these steps to install the wiring. 16 Chapter 2 Installation procedures
22.
Connect the two sensor cables to each other. Be careful with the connector pins.
23.
Connect the sensor cable’s molex connector to the front holder bracket.
1
Sensor cable’s molex connector
2
Front holder bracket
24.
Reinstall the water hoses cover with the original two M4 Allen screws. See
Preliminary steps
on
page
4
.
25.
Close the press software and shut down the press.
Installing the wiring
Follow these steps to install the wiring.
16
Chapter 2
Installation procedures