HP Indigo WS6600 Splice Detection System Installation and Troubleshooting -- C - Page 9
Be careful that the bracket should not touch either roller.
View all HP Indigo WS6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
1. Remove the lower M6 Allen screw from the piston bracket. 2. Carefully slide the rear holder bracket under the left roller and push it until the bridge rear wall. CAUTION: Be careful that the bracket should not touch either roller. Installing the sensor 7
1.
Remove the lower M6 Allen screw from the piston bracket.
2.
Carefully slide the rear holder bracket under the left roller and push it until the bridge rear wall.
CAUTION:
Be careful that the bracket should not touch either roller.
Installing the sensor
7