HP Indigo WS6600 Splice Detection System Installation and Troubleshooting -- C - Page 34

Table 3-2 Splice detection Systab (continued) Item or I/O Name spliceDetectorParams > spliceToItmNipDistanceMm spliceDetectorParams > teachesFailedPerBlanket spliceDetectorParams > teachesFailedPerSubstrate Description Distance as substrate length, from splice detection sensor to ITM print nip Number of calibration failures for current blanket zeroed with blanket replacement (by imaging) Number of calibration failures for current substrate zeroed with substrate replacement (by imaging) Default 2350 Table 3-3 Splice detection Systab I/Os Item or I/O Name Description IO_WHS_SPLICE_SKIP_ACTIVE Set together with splice status 5 (5 = splice skipping active), but on fast data block. IO_WHS_SPLICE_ON_RW_TABLE Set together with splice status 7 (7 = splice stopped at RW table), but on fast data block. Table 3-4 Splice detection events Event ID SPLICE_SENSOR_TEACH_FAILED Type Warning SPLICE_DETECTED_SKIP_ONLY SPLICE_DETEC_STOP_SPEC_JOB DETECTED_SPLICE_ON_RW_TBL SPLICE_DETECTOR_WAS_DISABLED Warning Error. To Ready. Info Info SPLICE_DETECTOR_WAS_ENABLED Info SPLICE_DETECTOR_COUNTERS (activated Info from Imaging) Parameters Description WHS error code Calibration failed, splice detector disabled, function will resume next print Splice detected and skipped Splice detected. The process needs to be performed again. Printing stopped because a splice was detected. splicesCountPerBlanket splicesCountPerSubstrate Splice detector statistics with detector disabled. teachesFailedPerBlanket teachesFailedPerSubstrate blanketLifetime blanketLifetime Splice detector statistics with detector enabled. P1: String trigger (substrate or Blanket) P2: SpliceCounter P1 replaced. P2 splice counted. P3 calibrations failed. P3: failedTeachingCounter 32 Chapter 3 System information