HP LH4r HP Netserver Remote Administrator Guide - Page 74
Disconnect, Using SNMP Server Management Applications with Integrated RA
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 6 Using Integrated RA to Manage Server Operations 3. At the remote client, exit pcAnywhere and start the client application (this should be done without disconnecting the client modem; set up the modem so that it does not disconnect on dropped DTR (AT&D0) and set up the client application to use a direct serial connection, not a modem). 4. Your client and server application can now interact as if over a direct serial connection. Note that Integrated RA will now also monitor the server's management port for a disconnect or for 5 minutes of inactivity on the data receive line. In either case, the serial port will be switched back to Integrated RA, and the modem will wait for a new administrator login. 0. Disconnect When a remote management session is over, you can end the communications session with the server by choosing Disconnect from the Integrated RA Management Program main menu. It is important that you disconnect when your tasks are complete, otherwise the modem will remain tied up for the terminal session and Integrated RA will be unable to alert administrators of server problems. NOTE To guard against a connection being left open unintentionally, Integrated RA automatically disconnects the remote client from the host after a user-configurable span of inactivity. Using SNMP Server Management Applications with Integrated RA Installation of the Integrated RA SNMP agent and Management Information Base (MIB) permits compiling and querying of the MIB under any management platform that supports SNMP, including HP OpenView, HP TopTools, and Novell NMS. When compiled, the MIB tells the SNMP Manager which Integrated RA device variables are available for querying or setting. NOTE Integrated RA supplies SNMP Agents for Novell NetWare and Microsoft Windows NT and 2000 servers only. For more information on how SNMP NetServer Agents and MIBs may be used with Integrated RA, refer to Installing HP NetServer Agents Software online manual on your HP NetServer Online Documentation CD, or go to the HP NetServer web site and look under the Manuals section at www.hp.com/netserver. 70