HP LaserJet Pro 100 Service Manual - Page 85
Remove the low-voltage power supply assembly 9 of 9
View all HP LaserJet Pro 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
8. Release the wire harness (callout 1) from the guide (callout 2), and then pull the wire harness through the hole in the chassis. Figure 1-88 Remove the low-voltage power supply assembly (8 of 9) 2 1 9. Disconnect three connectors (callout 1) and remove the low-voltage power supply assembly (callout 2). Figure 1-89 Remove the low-voltage power supply assembly (9 of 9) ENWW 1 2 Removal and replacement procedures 67
8.
Release the wire harness (callout 1) from the guide (callout 2), and then pull the wire harness
through the hole in the chassis.
Figure 1-88
Remove the low-voltage power supply assembly (8 of 9)
2
1
9.
Disconnect three connectors (callout 1) and remove the low-voltage power supply assembly
(callout 2).
Figure 1-89
Remove the low-voltage power supply assembly (9 of 9)
1
2
ENWW
Removal and replacement procedures
67