HP LaserJet Pro 100 Service Manual - Page 94
CAUTION, Carefully feed the FFC through the slot during removal and during replacement.
View all HP LaserJet Pro 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
2. Remove two screws (callout 1). TIP: These screws require a #10 torx driver Figure 1-103 Remove the document feeder base assembly (2 of 3) 1 3. Open the document feeder base, and then carefully remove it from the product. CAUTION: Do not damage the FFC (callout 1) that runs through the document feeder base. Carefully feed the FFC through the slot during removal and during replacement. Figure 1-104 Remove the document feeder base assembly (3 of 3) 1 76 Chapter 1 Removal and replacement ENWW
2.
Remove two screws (callout 1).
TIP:
These screws require a #10 torx driver
Figure 1-103
Remove the document feeder base assembly (2 of 3)
1
3.
Open the document feeder base, and then carefully remove it from the product.
CAUTION:
Do not damage the FFC (callout 1) that runs through the document feeder base.
Carefully feed the FFC through the slot during removal and during replacement.
Figure 1-104
Remove the document feeder base assembly (3 of 3)
1
76
Chapter 1
Removal and replacement
ENWW