HP Model 744 Installing the A4315A and A4316A HCRX/VME Graphics Options - Page 25
Installing the HCRX/VME Graphics Hardware, Removing a Blank Plate
View all HP Model 744 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installing the HCRX/VME Graphics Hardware b. Remove the screws from the bottom of the SBC and carefully disconnect the GSC expansion board, as shown in Figure 2-2. c. Remove the blank plate installed in the right most opening of the front panel expansion plate, if installed. See Figure 2-3. Figure 2-3. Removing a Blank Plate 2-5
Installing the HCRX/VME Graphics Hardware
2–5
b.
Remove the screws from the bottom of the SBC and carefully disconnect the GSC
expansion board, as shown in Figure 2–2.
c.
Remove the blank plate installed in the right most opening of the front panel
expansion plate, if installed. See Figure 2–3.
Figure 2–3.
Removing a Blank Plate