HP Model 744 Installing the A4315A and A4316A HCRX/VME Graphics Options - Page 33
Replace the SBC in the Card Cage., Installing the HCRX/VME Graphics Hardware,
View all HP Model 744 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Installing the HCRX/VME Graphics Hardware 8. Replace the SBC in the Card Cage. a. Replace the SBC in the VME card cage. b. Push on the SBC's ejector handles until it is fully seated in the card cage, as shown in Figure 2-9. Figure 2-9. Replacing the Single Board Computer c. Use a small flat blade screwdriver to tighten the two captive screws on the SBC and the two captive screws on the expansion slot. 2-13
Installing the HCRX/VME Graphics Hardware
2–13
8.
Replace the SBC in the Card Cage.
a.
Replace the SBC in the VME card cage.
b.
Push on the SBC’s ejector handles until it is fully seated in the card cage, as shown
in Figure 2–9.
Figure 2–9.
Replacing the Single
Boar
d Computer
c.
Use a small flat blade screwdriver to tighten the two captive screws on the SBC and
the two captive screws on the expansion slot.