HP Model 744 Installing the A4315A and A4316A HCRX/VME Graphics Options - Page 30
Install a blank cover., Installing the HCRX/VME Graphics Hardware,
View all HP Model 744 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installing the HCRX/VME Graphics Hardware 6. Install a blank cover. If you are not reinstalling an option board, in the opening on the left side of the front panel extension plate, install a blank cover that came with the kit using two M2x.45X5mm screws. Use a Pozidriv screwdriver to tighten the screws. See Figure 2-7. Figure 2-7. Installing a Blank Plate 2-10
Installing the HCRX/VME Graphics Hardware
2–10
6.
Install a blank cover.
If you are not reinstalling an option board, in the opening on the left side of the front
panel extension plate, install a blank cover that came with the kit using two
M2x.45X5mm screws. Use a Pozidriv screwdriver to tighten the screws. See Figure 2–7.
Figure 2–7.
Installing a Blank Plate