HP Model 744 Installing the A4315A and A4316A HCRX/VME Graphics Options - Page 51

Troubleshooting, Table 4-2., Unable to start HP CDE or HP VUE warn

Get HP Model 744 - VME Workstation PDF manuals and user guides View all HP Model 744 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Troubleshooting Table 4-2. Troubleshooting HP-UX Problem (HP-UX systems only) During the HP-UX boot sequence, yellow blocks are not replaced by boot status messages Blank colored or textured background Unable to start HP CDE or HP VUE warning message The HP CDE or HP VUE login window is not displayed, but you do see a console login prompt Solution Find a login prompt on either the on-board graphics device or the RS-232 port. Alternatively, follow the procedure in Chapter 3, Section 1, to select this graphics device as the boot console and boot the machine manually. This causes the login prompt to be displayed on this device. Login and check that the X Windows, HP CDE, and HP VUE configurations are correct. The system is configured for two graphics heads and this is not the primary head. Log in through the primary graphics head and check that the X Windows, HP CDE, or HP VUE configurations are correct. Use to get a login prompt. Log in and check that the X Windows, HP CDE, and HP VUE configurations are correct. Log in and check that the X Windows, HP CDE, and HP VUE configurations are correct. 4-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Troubleshooting
4–3
Table 4–2.
Troubleshooting HP-UX
Problem (HP-UX systems only)
Solution
During the HP-UX boot sequence, yellow
blocks are not replaced by boot status mes-
sages
Find a login prompt on either the on–board
graphics device or the RS–232 port.
Alternatively, follow the procedure in Chap-
ter 3, Section 1, to select this graphics
device as the boot console and boot the
machine manually. This causes the login
prompt to be displayed on this device.
Login and check that the X Windows, HP
CDE, and HP VUE configurations are cor-
rect.
Blank colored or textured background
The system is configured for two graphics
heads and this is not the primary head.
Log in through the primary graphics head
and check that the X Windows, HP CDE, or
HP VUE configurations are correct.
Unable to start HP CDE or HP VUE warn-
ing message
Use <CR> to get a login prompt.
Log in and check that the X Windows, HP
CDE, and HP VUE configurations are cor-
rect.
The HP CDE or HP VUE login window is
not displayed, but you do see a console lo-
gin prompt
Log in and check that the X Windows, HP
CDE, and HP VUE configurations are
correct.