HP Model 744 Installing the A4315A and A4316A HCRX/VME Graphics Options - Page 3
Contents, Preface, Preparing for the Installation
View all HP Model 744 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Contents Preface Chapter 1 Preparing for the Installation Check That You Have the Necessary Equipment 1-2 System Prerequisites 1-3 Hardware Prerequisites 1-3 Firmware Prerequisites 1-3 Software Prerequisites 1-4 For HP-UX 9.x only, Configure X Windows and HP VUE 1-5 Setting Up a Single Monitor System (HP-UX 9.x only 1-5 Setting Up a Dual Monitor System (HP-UX 9.x only 1-7 Chapter 2 Installing the HCRX/VME Graphics Hardware Remove SBC from the card cage 2-2 Remove option boards and expansion board, if installed 2-4 For Model 743 only, install new Boot ROM if required 2-6 Install front panel extension plate, if needed 2-7 Install HCRX/VME graphics board 2-8 Install a blank cover 2-10 Reinstall an option board 2-11 Replace the SBC in the Card Cage 2-13 Connect the monitor 2-14 iii