HP Pavilion 7700 HP Pavilion Home PC - (English) Upgrading and Servicing the P - Page 14

and then push

Get HP Pavilion 7700 - Desktop PC PDF manuals and user guides View all HP Pavilion 7700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

7 Pull the add-in card bracket up and out. 8 If you're adding a new card to a previously unused slot, remove the expansion slot cover. Warning: Be careful of the sharp edges on the expansion slot cover. If you're replacing a card, first disconnect any external and/or internal cables attached to the card. Hold the metal bracket and the far top corner of the card. Carefully remove the card by pulling the card straight out of the expansion slot. 9 Insert the new card into the slot and push straight down. Make sure the card is properly seated. 10 To replace the add-in card bracket, slide the bracket into the hole (C) and then push down until the bracket clicks into place. To reassemble the computer: 1 Replace the side panel (see "Replacing the Side Panel" on page 23). 2 Reconnect the power cord and all other cables. 3 Reconnect the modem/phone cable.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
7
Pull the add-in card bracket up and out.
8
If you’re adding a new card to a previously
unused slot, remove the expansion slot
cover.
Warning:
Be careful of the sharp edges on
the expansion slot cover.
If you’re replacing a card, first disconnect
any external and/or internal cables
attached to the card. Hold the metal
bracket and the far top corner of the card.
Carefully remove the card by pulling the
card straight out of the expansion slot.
9
Insert the new card into the slot and push
straight down. Make sure the card is
properly seated.
10
To replace the add-in card bracket, slide
the bracket into the hole (
C
) and then push
down until the bracket clicks into place.
To reassemble the computer:
1
Replace the side panel (see “Replacing the
Side Panel” on page 23).
2
Reconnect the power cord and all other
cables.
3
Reconnect the modem/phone cable.