HP Pavilion Media Center m7600 HP Media Center PC - Getting Started Guide - Page 25
Connecting the Remote Sensor, You can locate
View all HP Pavilion Media Center m7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Connecting the Remote Sensor The remote sensor is a small device that connects to the PC and allows the remote control to work with the Media Center program. 1 If you have a cable TV set-top box, a satellite set-top box, or other set-top box that controls your TV signal, connect the remote control sensor cable (emitter) (A) into connector (1) on the back of the remote sensor; otherwise skip to step 3. Connector (2) can also be used if you have a second set-top box. 2 Remove the paper from the backing tape on the end of the cable (B), and then press the end of the cable over the remote infrared (IR) receiver window on your cable TV set-top box (C). You can locate the remote infrared receiver window by using a flashlight to shine through the plastic on the front of most devices. P 3 Plug the remote control sensor cable into a USB connector (D) on the back of the PC. 4 Place the remote sensor so that you can easily point at it with the remote control. (An ideal spot would be on top of the monitor or desk.) C n You can locate the remote infrared receiver window on your cable TV set-top box by using a flashlight to shine through the plastic on the front of most devices. 21 A B D Connecting the Television Signal 21