HP Pavilion Media Center m7600 HP Media Center PC - Getting Started Guide - Page 56
Retasking front-panel connectors, Disabling digital audio output with Sound Effect Manager (optional)
View all HP Pavilion Media Center m7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Retasking front-panel connectors To retask using the Audio Wizard (type 6 connector): With the Audio Wizard enabled, both the microphone connector and the headphones connector on the front of the PC can be retasked to perform a different audio function. These two connectors are universal audio jacks. When you plug in a cable, the wizard asks you to select the function for the cable from a list, and then it sets the universal audio jack to perform as the selected function. The functions are: ■ Stereo speaker (out) ■ Microphone (in) ■ Headphone (in) ■ Audio line in 1 Follow steps 1 through 7 of the procedure "The Sound Effect Manager control screens." 2 When you plug in a cable, the wizard asks you to select the device you plugged in from a list. 3 Close the window. Disabling digital audio output with Sound Effect Manager (optional) To disable digital audio output: 1 Follow the procedure "Configuring Audio Output with Sound Effect Manager" on page 50. 2 Click the Digital Audio button. Select Digital output off (you can also select Digital-in to Digital-out pass through mode). 3 Close the window. If you select Enable digital audio output, the microphone volume setting becomes not muted and the recording source is fixed in Stereo Mix. If you place the microphone too close to the speakers, feedback can occur. 52 HP Media Center PC Getting Started Guide