HP Pavilion Media Center m7600 HP Media Center PC - Getting Started Guide - Page 74
Remote sensor is not receiving a signal from the remote control, Memory Card Reader, Start
View all HP Pavilion Media Center m7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Remote sensor is not receiving a signal from the remote control If a faint red light doesn't appear when you point the remote control at the remote sensor and press the OK button, try the following: 1 Click Start, right-click My Computer, and then select Properties. 2 Click the Hardware tab, and then click Device Manager. 3 Click the plus (+) sign next to Universal Serial Bus Controllers. 4 If the eHome Infrared Receiver is listed under Universal Serial Bus Controllers, Windows is properly detecting the IR Receiver. If it is not listed, go to the next step. 5 Unplug the end of the USB cable on the remote sensor from the PC, and plug it into the same USB port. 6 Disconnect all other USB devices, leave the remote sensor plugged in, and then restart the PC. Plug in other USB devices after the remote sensor appears in the Device Manager window. Memory Card Reader Digital cameras and other digital imaging devices use memory cards, or media, to store digital picture files. The optional memory card reader can read and can write to a variety of types of memory cards and the Microdrive disk drives. The card reader is accessible directly on the front of the PC. It has four horizontal card slots, which accept the memory cards and the Microdrive disk drive. You can place media in one or more of the card slots and use each media independently. Place only one piece of media in a slot at one time. Each card slot has its own drive letter and icon. When you insert media, the display label may change to the title of the media, if the title is present. 70 HP Media Center PC Getting Started Guide