HP Pavilion dv7-5000 HP Pavilion dv7 Entertainment PC - Maintenance and Servic - Page 64

remove the following

Get HP Pavilion dv7-5000 - Entertainment Notebook PC PDF manuals and user guides View all HP Pavilion dv7-5000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 51). 5. Remove the primary hard drive cover (see Primary hard drive cover on page 52). Remove the hard drive: 1. Remove the four Phillips PM2.5×3.0 screws (1). 2. Disconnect the hard drive by sliding it to the left (2), and then remove the hard drive (3) from the computer. 3. If it is necessary to replace the hard drive bracket or any of the hard drive bracket components, remove the following: ● (1) Hard drive adapter cable ● (2) Four rubber isolators ● (3) Four Phillips PM3.0×3.5 screws that secure the hard drive bracket rails and Mylar cover to the hard drive ● (4) Left and right hard drive bracket rails with Mylar cover 54 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
51
).
5.
Remove the primary hard drive cover (see
Primary hard drive cover
on page
52
).
Remove the hard drive:
1.
Remove the four Phillips PM2.5×3.0 screws
(1)
.
2.
Disconnect the hard drive by sliding it to the left
(2)
, and then remove the hard drive
(3)
from the
computer.
3.
If it is necessary to replace the hard drive bracket or any of the hard drive bracket components,
remove the following:
●
(1)
Hard drive adapter cable
●
(2)
Four rubber isolators
●
(3)
Four Phillips PM3.0×3.5 screws that secure the hard drive bracket rails and Mylar cover
to the hard drive
●
(4)
Left and right hard drive bracket rails with Mylar cover
54
Chapter 4
Removal and replacement procedures