HP Presario F500 Compaq Presario F500 and G6000 Notebook PC - Maintenance and - Page 38

Hard drive, and swing it to left.

Get HP Presario F500 - Notebook PC PDF manuals and user guides View all HP Presario F500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Hard drive Description 5400-rpm, 120-GB 5400-rpm, 100-GB 5400-rpm, 80-GB Spare part number 442882-001 444003-001 442881-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 29). Remove the hard drive: 1. Position the computer with the front toward you. 2. Loosen the two Phillips PM2.0×5.0 screws (1) that secure the hard drive cover to the computer. 3. Lift the right side of the hard drive cover (2) and swing it to left. 4. Remove the hard drive cover. NOTE: The hard drive cover is included in the Plastics Kit, spare part number 442891-001. 5. Use the Mylar tab (1) to lift the hard drive until it disconnects it from the system board. 30 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
Hard drive
Description
Spare part number
5400-rpm, 120-GB
442882-001
5400-rpm, 100-GB
444003-001
5400-rpm, 80-GB
442881-001
Before removing the hard drive, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power cord.
4
.
Remove the battery (see
Battery
on page
29
).
Remove the hard drive:
1
.
Position the computer with the front toward you.
2
.
Loosen the two Phillips PM2.0×5.0 screws
(1)
that secure the hard drive cover to the computer.
3
.
Lift the right side of the hard drive cover
(2)
and swing it to left.
4
.
Remove the hard drive cover.
NOTE:
The hard drive cover is included in the Plastics Kit, spare part number 442891-001.
5
.
Use the Mylar tab
(1)
to lift the hard drive until it disconnects it from the system board.
30
Chapter
4
Removal and replacement procedures