HP Presario F500 Compaq Presario F500 and G6000 Notebook PC - Maintenance and - Page 44

Optical drive, Remove the Phillips PM2.5×7.0 screw

Get HP Presario F500 - Notebook PC PDF manuals and user guides View all HP Presario F500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

4. Remove the WLAN module (3) by pulling it away from the socket at an angle . NOTE: WLAN modules are designed with a notch (4) to prevent incorrect installation into the WLAN module socket. Reverse this procedure to install a WLAN module. Optical drive NOTE: All optical drive spare part kits include an optical drive bezel. Description DVD±RW and CD-RW Super Multi Double-Layer Combo Drive DVD-RW and CD-RW Combo Drive DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe ** For use with F550-F579, G6000 models Spare part number 442883-001 442884-001 453048-001** Before removing the optical drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 29). Remove the optical drive: 1. Position the computer with the left side toward you. 2. Remove the Phillips PM2.5×7.0 screw (1) that secures the optical drive to the computer. 3. Insert a thin tool, such as a paper clip (2), into the media tray release hole. (The optical drive media tray is partially ejected from the optical drive bay.) 36 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
4
.
Remove the WLAN module
(3)
by pulling it away from the socket at an angle .
NOTE:
WLAN modules are designed with a notch
(4)
to prevent incorrect installation into the
WLAN module socket.
Reverse this procedure to install a WLAN module.
Optical drive
NOTE:
All optical drive spare part kits include an optical drive bezel.
Description
Spare part number
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
442883-001
DVD-RW and CD-RW Combo Drive
442884-001
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
453048-001**
** For use with F550–F579, G6000 models
Before removing the optical drive, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power cord.
4
.
Remove the battery (see
Battery
on page
29
).
Remove the optical drive:
1
.
Position the computer with the left side toward you.
2
.
Remove the Phillips PM2.5×7.0 screw
(1)
that secures the optical drive to the computer.
3
.
Insert a thin tool, such as a paper clip
(2)
, into the media tray release hole. (The optical drive media
tray is partially ejected from the optical drive bay.)
36
Chapter
4
Removal and replacement procedures