HP Presario F500 Compaq Presario F500 and G6000 Notebook PC - Maintenance and - Page 67
each time the fan/heat sink assembly is removed. Thermal pads and thermal paste should be applied
View all HP Presario F500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
4. Remove the fan/heat sink assembly (3). NOTE: Due to the adhesive quality of the thermal paste and thermal pads located between the fan/heat sink assembly and system board components, it may be necessary to move the fan/heat sink assembly from side to side to detach the assembly. NOTE: The thermal paste and thermal pads should be thoroughly cleaned from the surfaces of the fan/ heat sink assembly (1), (2), and (3), the system board components (4) and (6), and the processor (5) each time the fan/heat sink assembly is removed. Thermal pads and thermal paste should be applied to all surfaces before the fan/heat sink assembly is reinstalled. Thermal pads and thermal paste are included with all fan/heat sink assembly, system board, and processor spare part kits. Reverse this procedure to install the fan/heat sink assembly. Component replacement procedures 59