HP Presario F500 Compaq Presario F500 and G6000 Notebook PC - Maintenance and - Page 46

Switch cover, and the Phillips PM2.5×5.0 screw

Get HP Presario F500 - Notebook PC PDF manuals and user guides View all HP Presario F500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Switch cover Description Switch cover (includes display convertible hinge base cover) Spare part number 442889-001 Before removing the switch cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 29). Remove the switch cover: 1. Turn the computer upside down, with the rear panel toward you. 2. Remove the two Phillips PM2.5×10.0 screws (1) and the Phillips PM2.5×5.0 screw (2) that secure the switch cover to the computer. 3. Turn the computer display-side up, with the front toward you. 4. Open the computer as far as possible. 38 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
Switch cover
Description
Spare part number
Switch cover (includes display convertible hinge base cover)
442889-001
Before removing the switch cover, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power cord.
4
.
Remove the battery (see
Battery
on page
29
).
Remove the switch cover:
1
.
Turn the computer upside down, with the rear panel toward you.
2
.
Remove the two Phillips PM2.5×10.0 screws
(1)
and the Phillips PM2.5×5.0 screw
(2)
that secure
the switch cover to the computer.
3
.
Turn the computer display-side up, with the front toward you.
4
.
Open the computer as far as possible.
38
Chapter
4
Removal and replacement procedures