HP ProLiant SL2500 HP ROM-Based Setup Utility User Guide - Page 172
POST F1 Prompt, Power Button, Automatic Power-On, Power-On Delay, Server Passwords menu
View all HP ProLiant SL2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
POST F1 Prompt The POST F1 Prompt option is a toggle setting that configures the server so the F1 key must be pressed to proceed when an error is encountered during the power-up sequence. A series of system tests executes during POST before continuing with the following: • If failures occur that allow the system to continue operating, the system continues to boot but posts a message. • If critical components fail or are missing, the server attempts to boot. If it can boot, it posts a message and an F1 prompt. ◦ If Enabled is selected and an error occurs, the system stops at the F1 prompt until the F1 key is pressed, before continuing to boot. ◦ If Delayed is selected and an error occurs, the system pauses for 20 seconds at the F1 prompt, and then continues to boot the OS. • If the system cannot run with the missing or failed components, it halts until those components are replaced. NOTE: The POST F1 Prompt setting is enabled by default in ProLiant ML and DL servers and is disabled by default in BL servers. Power Button Disabling the Power Button feature causes the momentary power button to stop functioning under any OS. The Power Button feature does not override the 4-second hold-down of the server power button. Automatic Power-On The Automatic Power-On feature enables the server to automatically power on when auxiliary power is applied to the server. Power-On Delay The Power-On Delay feature delays the server from powering on for a specified time to prevent power usage spikes when multiple servers power up after a power loss. Wake-on LAN, RTC wake-up, and iLO Virtual Power Button events override the delay and immediately power on the server. The Power-On Delay options are: • Disabled • 15-second delay • 30-second delay • 45-second delay • 60-second delay • Random delay Server Passwords menu The Server Passwords menu includes options that configure the password environment of the server: • "Set Power-On Password" (page 173) • "Set Admin Password" (page 173) • "Trusted Platform Module" (page 173) 172 RBSU menu-driven interface, version 2.xx (G5 and earlier servers)