HP Rp5700 Hardware Reference Guide - HP rp5700 - Page 41

Connecting the Primary Hard Drive Data and Power Cables, Installing the Primary Hard Drive

Get HP Rp5700 - Point of Sale System PDF manuals and user guides
UPC - 884420470731
View all HP Rp5700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

2. Insert the primary hard drive "upside down." Align the hard drive with the primary hard drive bay in the drive cage so that the bottom of the hard drive is next to the optical drive compartment and the power and data connectors are up. Slide the drive all the way down into the drive cage until it locks in place. Figure 2-34 Installing the Primary Hard Drive 3. Connect the data cable (1) and power cable (2) to the back of the primary hard drive. NOTE: If the system has only one SATA hard drive, the data cable must be connected to the dark blue connector labeled SATA 0 on the system board to avoid any hard drive performance problems. Figure 2-35 Connecting the Primary Hard Drive Data and Power Cables ENWW Installing and Removing Drives 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
2.
Insert the primary hard drive “upside down.” Align the hard drive with the primary hard drive bay in
the drive cage so that the bottom of the hard drive is next to the optical drive compartment and the
power and data connectors are up. Slide the drive all the way down into the drive cage until it locks
in place.
Figure 2-34
Installing the Primary Hard Drive
3.
Connect the data cable (1) and power cable (2) to the back of the primary hard drive.
NOTE:
If the system has only one SATA hard drive, the data cable must be connected to the
dark blue connector labeled SATA 0 on the system board to avoid any hard drive performance
problems.
Figure 2-35
Connecting the Primary Hard Drive Data and Power Cables
ENWW
Installing and Removing Drives
35