HP Rp5700 Hardware Reference Guide - HP rp5700 - Page 46

Connecting the Power and Data Cables to the Secondary Hard Drive,

Get HP Rp5700 - Point of Sale System PDF manuals and user guides
UPC - 884420470731
View all HP Rp5700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

3. Connect the hard drive power and data cables to the back of the secondary hard drive. NOTE: The primary hard drive data cable must be connected to the dark blue connector labeled SATA 0 on the system board to avoid any hard drive performance problems. Connect the other end of the secondary hard drive data cable to the next available (unpopulated) SATA connector on the system board in the following order: SATA 0, SATA 1, SATA 2. Figure 2-43 Connecting the Power and Data Cables to the Secondary Hard Drive 4. Return the power supply to the down position until it locks. 5. Return the drive cage to the down position into the computer. 6. Replace the computer cover. 7. If the computer was on a stand, replace the stand. 8. Reconnect the power cord and any external devices, then turn on the computer. 9. Lock any security devices that were disengaged when the computer cover was removed. 40 Chapter 2 Hardware Upgrades ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
3.
Connect the hard drive power and data cables to the back of the secondary hard drive.
NOTE:
The primary hard drive data cable must be connected to the dark blue connector labeled
SATA 0 on the system board to avoid any hard drive performance problems. Connect the other
end of the secondary hard drive data cable to the next available (unpopulated) SATA connector
on the system board in the following order: SATA 0, SATA 1, SATA 2.
Figure 2-43
Connecting the Power and Data Cables to the Secondary Hard Drive
4.
Return the power supply to the down position until it locks.
5.
Return the drive cage to the down position into the computer.
6.
Replace the computer cover.
7.
If the computer was on a stand, replace the stand.
8.
Reconnect the power cord and any external devices, then turn on the computer.
9.
Lock any security devices that were disengaged when the computer cover was removed.
40
Chapter 2
Hardware Upgrades
ENWW