HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 129
FcConnUnitRevsRevision, FcConnUnitRevsDescription, fcConnUnitSensorIndex
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
McDATA SNMP Support 2 FcConnUnitRevsRevision Type SnmpAdminString Product Mapping XX.XX.XX (The revision of the switch). Access R Description A vendor-specific value identifying a revision of a component of the connectivity unit. FcConnUnitRevsDescription Type SnmpAdminString Product Mapping Switch Firmware Level Access R Description Description of a component in the fcConnUnit to which the revision corresponds. Sensor Table The sensor table lists the sensors (for fan and power supplies) supported by each switch. For each switch, the table will contain a list of all fan and power supply FRU positions, regardless of whether they are installed or not. When a FRU is not installed, the UnitSensorStatus for that table entry will be unknown(1). When a power supply or fan FRU is installed or removed, a sensor trap will be sent (if enabled) which contains an index to the appropriate entry in this table, for the affected FRU. Note that the number of entries in the table does not change when a fan/power supply FRU is installed or removed. *fcConnUnitSensorIndex Type Unsigned32 Product Mapping Not assessable. Access R Description A unique value among all fcConnUnitSensorEntrys with the same value of fcConnUnitId, in the range between 1 and fcConnUnitNumSensors[fcConnUnitId]. Fibre Alliance MIB 2-107