HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 148

McDATA SNMP Support 2 Product Mapping Access Description For F ports, return Fibre Channel Address. For E_Ports, return left adjusted domainId of the switch. R This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected to be a 24-bit Big Endian value. If this is loop, then it is the ALPA that is connected. If this is an E_Port, then it will only contain the domain ID. If not any of those, unknown or cascaded loop, return all bits set to 1. fcConnUnitPortStatTable - Port statistics There is one and only one statistics table for each individual port. For all objects in statistics table, if the object is not supported by the conn unit then the high order bit is set to 1 with all other bits set to zero. The high order bit is reserved to indicate if the object if supported or not. All objects start at a value of zero at hardware initialization and continue incrementing till end of 63 bits and then wrap to zero. *fcConnUnitPortStatIndex Type Unsigned32 Product Mapping A port number, starting from 1 to maximum number of ports. Access R Description A unique value among all entries in this table, between 0 and fcConnUnitNumPort[fcConnUnitPortUnitId]. fcConnUnitPortStatCountError Type Counter64 Product Mapping This MIB object counts: address ID errors, CRC errors, delimiter errors, frames too short, invalid transmission words, link failures, primitive sequence errors, signal losses, 2-126 E/OS SNMP Support Manual