HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 300
connUnitPortStatCountFBSYFrames, connUnitPortStatCountPBSYFrames
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 300 highlights
FC Management MIB B connUnitPortStatCountBBCreditZero Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory Description Count of transitions in/out of BBcredit zero state. The other side is not providing any credit. Note, this is a Fibre Channel stat only. Sequence ::= { connUnitPortStatEntry 8 } connUnitPortStatCountInputBuffersFull Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory Description Count of occurrences when all input buffers of a port were full and outbound buffer-to-buffer credit transitioned to zero. There is no credit to provide to other side. Note, this is a Fibre Channel stat only. Sequence ::= { connUnitPortStatEntry 9 } connUnitPortStatCountFBSYFrames Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory Description Count of times that FBSY was returned to this port as a result of a frame that could not be delivered to the other end of the link. This occurs if either the Fabric or the destination port is temporarily busy. Port can only occur on SOFc1 frames (the frames that establish a connection). Note, this is a Fibre Channel only stat. This is the sum of all classes. If you cannot keep the by class counters, then keep the sum counters. Sequence ::= { connUnitPortStatEntry 10 } connUnitPortStatCountPBSYFrames Syntax OCTET STRING (SIZE (8)) B-52 E/OS SNMP Support Manual
![](/manual_guide/products/hewlettpackard-316095b21-fw-080100-mcdata-eos-snmp-support-manual-620000131630-2005-88a75d8/300.png)