HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 204
Event group
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Fibre Alliance MIB A fcConnUnitPortNodeWwn Syntax FcNameId Max-Access read-only Status current Description The Node World Wide Name of the port if applicable, otherwise all zeros. This should have the same value for a group of related ports. The container is defined as the largest physical entity. For example, all ports on HBAs on a host will have the same Node WWN. All ports on the same storage subsystem will have the ame Node WWN. Sequence ::= { fcConnUnitPortEntry 20 } fcConnUnitPortHWState Syntax INTEGER { unknown (1), failed (2), bypassed (3), active (4), loopback (5), txfault (6), noMedia (7), linkDown (8) port failed diagnostics FCAL bypass, loop only connected to a device Port in ext loopback Transmitter fault media not installed waiting for activity (rx sync) } Max-Access Status Description Sequence read-only current The hardware detected state of the port. ::= { fcConnUnitPortEntry 21 } Event group fcConnUnitEventTable Syntax Max-Access SEQUENCE OF FcConnUnitEventEntry not-accessible A-34 E/OS SNMP Support Manual
![](/manual_guide/products/hewlettpackard-316095b21-fw-080100-mcdata-eos-snmp-support-manual-620000131630-2005-88a75d8/204.png)