HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 27

McDATA SNMP Support 2 Trap ES link added event* Switch SCN Switch Deletion Event SCN Sensor SCN Port SCN Severity Sent because MIB Trap OID E/OS EFCM N/A A new link has been FCEOS 1.3.6.1.4.1.289.15 YES NO detected. NOTE: up to 10 seconds may elapse after link is added before trap is sent. Alert Change in switch status. FC-MGMNT 1.3.6.1.2.1.8888.0.1 YES YES Alert A switch is removed FC-MGMNT 1.3.6.1.2.1.8888.0.2 NO YES from management control. Info A new system event FC-MGMNT 1.3.6.1.2.1.8888.0.3 YES YES was generated. Alert Change in status for FC-MGMNT 1.3.6.1.2.1.8888.0.4 YES YES FAN/FAN2/POWER FRUs. Alert A change in port status. FC-MGMNT 1.3.6.1.2.1.8888.0.5 YES YES Enterprise-specific Port Status Change Trap * EOS 6.0 and later only. The following sections describe each trap and the variables within the traps. For each variable, the OID is expressed as a numeric value first followed by a second line showing the symbolic object name. Appended to the right of the OIDs are the index values for each object. Most of the objects within traps are actually table values. (That is, they refer to a MIB object which is part of a table defined in the MIB). Each SNMP table value must have an index appended to identify a specific table row. For example, the enterprise specific port status change trap has the variable binding for fcEosPortOpStatus, which is a table entry value. So the OID for fcEosPortOpStatus (1.3.6.1.4.1.289.2.1.1.2.3.1.1.3) specifies a table column - to get a value for a specific port the table index (port_number+1) must be appended to the OID. If the trap occurred because of a change on port 5, then the actual variable OID would be 1.3.6.1.4.1.289.2.1.1.2.3.1.1.3. This trap is sent for each port which has a status change. There is 1 variable binding as follows: E/OS Trap Overview 2-5