HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 403
fcFxPortPhysAdminStatus, As the result of either explicit management action or per
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 403 highlights
Fabric Element Management MIB D Status Description Sequence mandatory This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized. ::= { fcFxPortPhysEntry 2 } fcFxPortPhysAdminStatus Syntax INTEGER { online (1), -- place port online offline (2), -- take port offline testing (3) -- initiate test procedures } Access read-write Status mandatory Description The desired state of the FxPort. A management station may place the FxPort in a desired state by setting this object accordingly. The testing(3) state indicates that no operational frames can be passed. When a Fabric Element initializes, all FxPorts start with fcFxPortPhysAdminStatus in the offline(2) state. As the result of either explicit management action or per configuration information accessible by the Fabric Element, fcFxPortPhysAdminStatus is then changed to either the online(1) or testing(3) states, or remains in the offline state. Sequence ::= { fcFxPortPhysEntry 3 } fcFxPortPhysOperStatus Syntax Access INTEGER { online (1), -- Login may proceed offline (2), -- Login cannot proceed testing (3), -- port is under test link-failure (4) -- failure after online/testing Other values may be used to indicate diagnostic for failed test. } read-only FCFE.MIB D-23
![](/manual_guide/products/hewlettpackard-316095b21-fw-080100-mcdata-eos-snmp-support-manual-620000131630-2005-88a75d8/403.png)