HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 196

Fibre Alliance MIB A Description Sequence The port type refers to the protocol active on the port and can take one of the following values: unknown (1) cannot be determined other (2) none of the following: notPresent (3) no port hubPort (4) hub port nPort (5) end port for fabric lPort (6) end port for loop flPort (7) public loop fPort (8) fabric port ePort (9) fabric expansion port gPort (10) generic fabric port domainController (11) domain controller hubController (12) hub controller scsi (13) parallel SCSI port escon (14) escon port lan (15) LAN port wan (16) WAN port" ::= { fcConnUnitPortEntry 2 } fcConnUnitPortFCClassCap Syntax FcPortFCClass Max-Access read-only Status current Description Bit mask that specifies the classes of service capability of this port. If this object is not applicable, the agent MUST return all bits set to zero. Sequence ::= { fcConnUnitPortEntry 3 } fcConnUnitPortFCClassOp Syntax FcPortFCClass Max-Access read-only Status current A-26 E/OS SNMP Support Manual