HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 545

SNMPv3 MIB G snmpCommunityStatus Syntax Max Access Status Description Sequence RowStatus read-create current The status of this conceptual row in the snmpCommunityTable. An entry in this table is not qualified for activation until instances of all corresponding columns have been initialized, either through default values, or through Set operations. The snmpCommunityName and snmpCommunitySecurityName objects must be explicitly set. There is no restriction on setting columns in this table when the value of snmpCommunityStatus is active(1)." ::= { snmpCommunityEntry 8 } The snmpTargetAddrExtTable snmpTargetAddrExtTable Syntax SEQUENCE OF SnmpTargetAddrExtEntry Max Access not-accessible Status current Description The table of mask and mms values associated with the snmpTargetAddrTable. The snmpTargetAddrExtTable augments the snmpTargetAddrTable with a transport address mask value and a maximum message size value. The transport address mask allows entries in the snmpTargetAddrTable to define a set of addresses instead of just a single address. The maximum message size value allows the maximum message size of another SNMP entity to be configured for use in SNMPv1 (and SNMPv2c) transactions, where the message format does not specify a maximum message size. Sequence ::= { snmpCommunityMIBObjects 2 } snmpTargetAddrExtEntry Syntax SnmpTargetAddrExtEntry Max Access not-accessible SNMPv3 MIB G-45