HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 404

Fabric Element Management MIB D Status Description Sequence mandatory The current operational status of the FxPort. The testing(3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline(2) then fcFxPortPhysOperStatus should be offline(2). If fcFxPortPhysAdminStatus is changed to online(1) then fcFxPortPhysOperStatus should change to online(1) if the FxPort is ready to accept Fabric Login request from the attached NxPort; it should proceed and remain in the link-failure(4) state if and only if there is a fault that prevents it from going to the online(1) state. ::= { fcFxPortPhysEntry 4 } fcFxPortPhysLastChange Syntax Access Status Description Sequence TimeTicks read-only mandatory The value of sysUpTime at the time the FxPort entered its current operational status. A value of zero indicates that the FxPort's operational status has not changed since the agent last restarted. ::= { fcFxPortPhysEntry 5 } fcFxPortPhysRttov Syntax Access Status Description Sequence MilliSeconds read-only -- instead of read-write mandatory The Receiver_Transmitter_Timeout value of the FxPort. This is used by the receiver logic to detect Loss of Synchronization. ::= { fcFxPortPhysEntry 6 } D-24 E/OS SNMP Support Manual