HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 259

FC Management MIB B connUnitUpTime Syntax Access Status Description Sequence TimeTicks read-only mandatory The number of centiseconds since the last unit initialization. ::= { connUnitEntry 9 } connUnitUrl Syntax Access Status Description Sequence DisplayString read-write mandatory URL to launch a management application, if applicable. Otherwise empty string. In a standalone unit, this would be the same as the top-level URL. This has the same definition as systemURL for keywords. If write is not supported, then return invalid. This value will be retained across boots. ::= { connUnitEntry 10 } connUnitDomainId Syntax Access Status Description Sequence OCTET STRING (SIZE(3)) read-only mandatory 24 bit Fibre Channel address ID of this connectivity unit, right justified with leading zero's if required. This should be set to the Fibre Channel address ID or if it is a switch it would be set to the Domain Controller address. If this value is not applicable, return all bits set to one. ::= { connUnitEntry 11 } connUnitProxyMaster Syntax Access INTEGER { unknown(1), no(2), yes(3) } read-only Connectivity unit group B-11