HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 290

FC Management MIB B Description Sequence This index is used to create a unique value for each entry in the link table with the same connUnitLinkUnitId. The value can only be reused if it is not currently in use and the value is the next candidate to be used. This value wraps at the highest value represented by the size of INTEGER. This value is reset to zero when the system is reset and the first value to be used is one. ::= { connUnitLinkEntry 2 } connUnitLinkNodeIdX Syntax Access Status Description Sequence OCTET STRING (SIZE(16)) read-only mandatory The node WWN of the unit at one end of the link. If the node WWN is unknown and the node is a connUnit in the responding agent then the value of this object MUST BE equal to its connUnitID. ::= { connUnitLinkEntry 3 } connUnitLinkPortNumberX Syntax INTEGER Access read-only Status mandatory Description The port number on the unit specified by connUnitLinkNodeIdX if known, otherwise -1. If the value is nonnegative then it will be equal to connUnitPortPhysicalNumber. Sequence ::= { connUnitLinkEntry 4 } connUnitLinkPortWwnX Syntax FcGlobalId Access read-only Status mandatory Description The port WWN of the unit specified by connUnitLinkNodeIdX if known, otherwise 16 octets of binary 0. Sequence ::= { connUnitLinkEntry 5 } B-42 E/OS SNMP Support Manual