HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 218
fcConnUnitPortStatInputBuffsFull, fcConnUnitPortStatFBSYFrames, fcConnUnitPortStatPBSYFrames
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Fibre Alliance MIB A fcConnUnitPortStatInputBuffsFull Syntax Counter64 Max-Access read-only Status current Description Count of occurrences when all input buffers of a port were full and outbound buffer-to-buffer credit transitioned to zero. There is no credit to provide to other side. Note, this is a Fibre Channel stat only. Sequence ::= { fcConnUnitPortStatEntry 8 } fcConnUnitPortStatFBSYFrames Syntax Counter64 Max-Access read-only Status current Description Count of times that FBSY was returned to this port as a result of a frame that could not be delivered to the other end of the link. This occurs if either the Fabric or the destination port is temporarily busy. Port can only occur on SOFc1 frames (the frames that establish a connection). Note, this is a Fibre Channel only stat. This is the sum of all classes. If you cannot keep the by class counters, then keep the sum counters. Sequence ::= { fcConnUnitPortStatEntry 9 } fcConnUnitPortStatPBSYFrames Syntax Counter64 Max-Access read-only Status current Description Count of times that PBSY was returned to this port as a result of a frame that could not be delivered to the other end of the link. This occurs if the destination port is temporarily busy. PBSY can only occur on SOFc1 frames (the frames that establish a connection). Note, this is a Fibre Channel only stat.This is the sum of all classes. If you cannot keep the by class counters, then keep the sum counters. Sequence ::= { fcConnUnitPortStatEntry 10 } A-48 E/OS SNMP Support Manual
![](/manual_guide/products/hewlettpackard-316095b21-fw-080100-mcdata-eos-snmp-support-manual-620000131630-2005-88a75d8/218.png)