HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 280
connUnitPortName, of the port from an arbitrated loop by
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 280 highlights
FC Management MIB B offlineConnUnitPort: If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific 'offline' operation. Examples of these operations are disabling a port's transceiver, the Link Failure protocol, request (NON-PARTICIPATING) command to the Loop Port state machine, or removal of the port from an arbitrated loop by a hub. onlineConnUnitPort: If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific 'online' operation. Examples of these operations are enabling a port's transceiver, the Link Failure protocol, request (PARTICIPATING) command to the Loop Port state machine, or addition of the port from an arbitrated loop by a hub. resetConnUnitPortCounters: If the addressed connUnit allows this operation to be performed to this port, the addressed port statistics table counters will be set to zero. NOTE: Each implementation may chose not to allow any or all of these values on a SET. On a read, if you do not support write, then return invalid. Otherwise return the last control operation attempted. Sequence ::= { connUnitPortEntry 16 } connUnitPortName Syntax Access Status Description DisplayString read-write mandatory A user-defined name for this port. This means that up to DisplayString characters may be supported. If less than, then the name will be truncated in the connunit. B-32 E/OS SNMP Support Manual