HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 47
ifMtu, ifSpeed, ifPhysAddress, ifAdminStatus, Access, Description
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
McDATA SNMP Support 2 ifMtu Type Access Description INTEGER R The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. ifSpeed Type Access Description Gauge R An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. ifPhysAddress Type Access Description PhysAddress R The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length. ifAdminStatus Type Access Description INTEGER RW The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. MIB Definitions: MIB-II 2-25
![](/manual_guide/products/hewlettpackard-316095b21-fw-080100-mcdata-eos-snmp-support-manual-620000131630-2005-88a75d8/47.png)