HP StorageWorks 2/140 FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131- - Page 304
This occurs if the destination N_Port is temporarily busy.
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 304 highlights
FC Management MIB B Description Sequence Count of Class 2 Frames transmitted out this port. Note, this is a Fibre Channel only stat. ::= { connUnitPortStatEntry 21 } connUnitPortStatCountClass2FBSYFrames Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory Description Count of times that FBSY was returned to this port as a result of a Class 2 Frame that could not be delivered to the other end of the link. This occurs if either the Fabric or the destination port is temporarily busy. FBSY can only occur on SOFc1 frames (the frames that establish a connection). Note, this is a Fibre Channel only stat. Sequence ::= { connUnitPortStatEntry 22 } connUnitPortStatCountClass2PBSYFrames Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory Description Count of times that PBSY was returned to this port as a result of a Class 2 Frame that could not be delivered to the other end of the link. This occurs if the destination N_Port is temporarily busy. PBSY can only occur on SOFc1 frames (the frames that establish a connection). Note, this is a Fibre Channel only stat. Sequence ::= { connUnitPortStatEntry 23 } connUnitPortStatCountClass2FRJTFrames Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory Description Count of times that FRJT was returned to this port as a result of a Class 2 Frame that was rejected by the fabric. Note, this is a Fibre Channel only stat. B-56 E/OS SNMP Support Manual