HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 130

McDATA SNMP Support 2 Product Mapping Access Description If the port is Not installed fcConnUnitPortFCClassOp = 0 else if the Port State is offline fcConnUnitPortFCClassOp = 0 else it depends on the operating Port Type: F_Port Use Class of Service specified in Fabric Login FL_Port Use Class of Service specified in one or more Fabric Login's (OR'd together) E_Port 0x58 = classF(0x40) + class2(0x10) + class3(0x08) R Bit mask that specifies the classes of service that are currently operational at this port. If this object is not applicable, the agent MUST return all bits set to zero. FcConnUnitPortState Type Product Mapping Access Description INTEGER R The current state of the port hardware. The bypassed value (4) means that the port is online but is currently being isolated from the loop or fabric for some reason; the other values are essentially self-explanatory. Any value for this object may co-exist with any value for the fcConnUnitPortStatus object. The values are defined as unknown (1), online (2), offline (3), bypassed (4). FcConnUnitPortStatus Type Product Mapping Access Description INTEGER R The current overall protocol status for the port. The warning value (4) means that the port needs attention; the notParticipating value (6) means that protocol is not being processed; the initializing value (7) means that the port is in the process of coming into service; the 2-112 E/OS SNMP Support Manual