HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 134

McDATA SNMP Support 2 OfflineConnUnitPort (6): If the addressed connectivity unit allows this operation to be performed to this port, the addressed port performs a vendor-specific 'offline' operation. Examples of these operations are: disabling a port's transceiver, the Link Failure protocol, request (NON-PARTICIPATING) command to the Loop Port state machine, or removal of the port from an arbitrated loop by a hub. OnlineConnUnitPort (7): If the addressed connectivity unit allows this operation to be performed to this port, the addressed port performs a vendor-specific 'online' operation. Examples of these operations are: enabling a port's transceiver, the Link Failure protocol, request (PARTICIPATING) command to the Loop Port state machine, or addition of the port from an arbitrated loop by a hub. NOTE: Each implementation may chose not to support SNMP Set operations for any or all of these values. For Sets specifying varbinds for instances of this object and values not supported by a given implementation, the agent will return the SNMP WrongValue PDU error code. FcConnUnitPortName Type Product Mapping Access Description SnmpAdminString Port Name R/W A string describing the addressed port. FcConnUnitPortPhysicalNumber Type Unsigned32 Product Mapping Physical port number from 0 to Maximum port number - 1 Access R Description This is the internal port number this port is known by. In many implementations, this should be the same as fcConnUnitPortIndex. Some implementations may have an internal port representation not compatible with the rules for table indexes. In that case, provide the internal representation of this port in this object. This value may also be used in the fcConnUnitLinkPortNumberX or fcConnUnitLinkPortNumberY objects of the fcConnUnitLinkTable. 2-116 E/OS SNMP Support Manual